Oil and petrol resistant PLATE AND ТЕПЛОМОРОЗОКИСЛОТОЩЕЛОЧЕСТОЙКАЯ GOST 7338-90

Oil and petrol resistant plates (MBS) and тепломорозокислотощелочестойкая (TMKSCH) are intended for the manufacture of rubber products, which serve to seal the fixed connections, to prevent friction between metal surfaces, for the perception of single shock, as well as gaskets, flooring and other neuplotnitelnyh compounds.

Technical plates TMKSCH

Technical plates MBS

thickness, mm

cut, mm

thickness, mm

cut, mm

10

1000 x 1000

10

1000 x 1000

10

1000 x 500

10

1000 x 500

20

1000 x 1000

20

1000 x 1000

20

1000 x 500

20

1000 x 500

30

1000 x 1000

30

1000 x 1000

30

1000 x 500

30

1000 x 500

40

1000 x 1000

40

1000 x 1000

40

1000 x 500

40

1000 x 500

50

1000 x 1000

50

1000 x 1000

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Technical plates MBS
Unshaped rubber-plate (type II) and rubber (type I) oil and petrol resistant (MBS) (GOST 7338-90)
Scope of rubber plates MBS: MBS technical plates intended for the manufacture of rubber products, which serve to seal the fixed connections, to prevent friction between metal surfaces, for the perception of single shock, as well as gaskets, flooring and other non-sealing compounds. Working environment MBS rubber plates: indoor air, tanks, vessels, inert gases at pressures from 0.05 to 0.4 MPa or oil, petroleum-based fuels, diesel at a pressure of 0.05 to 10.0 MPa nitrogen. Temperature of -30 ° C to +80 ° C.

Technical plates TMKSCH
Technical plates unshaped rubber (type I) and rubber (type II) TMKSCH (GOST 7338-90)
Scope of rubber plates TMKSCH: TMKSCH technical plates designed for the manufacture of rubber products, which serve to seal the fixed connections, to prevent friction between metal surfaces, for the perception of single shock, as well as gaskets, flooring and other non-sealing compounds. Working environment TMKSCH plates: indoor air, tanks, vessels, nitrogen, inert gases at pressures from 0.05 to 0.4 MPa or fresh water, marine, industrial, wastewater without organic solvents and lubricants, salt solution with concentration up to saturation point, acids, alkalis with a concentration of not more than 20% at a pressure of 0.05 to 10.0 MPa. Temperature from -45 ° C to +80 ° C.